It sounds like you have a Create-A-Breeze 8000 Series Roof Vent and in which case you'll need to replace the fan and motor as one using the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part # FVK8017-00. view full answer...
You are going to need a new camera system like the Furrion Vision S with a 4.3" Monitor # FOS43TASF or 5" Monitor # FOS05TASF. Furrion discontinued your FRC12TA-BL when they changed the way their cameras and monitors communicate. Because of this you have to upgrade both the monitor and camera.
The 4.3" version will work with the single monitor while the 5" kit will also allow you to add and connect Side Cameras # FCE48TASL.
Do note if you are using a newer truck you may need the Furrion... view full answer...
With 15'10" measured between your awning arms on your 2011 Forest River Rockwood Signature Ultra Lite 8280WS you will need a Solera 16' Replacement Awning Fabric - Burgundy Fade # LCV000334401. This will start out white when it is rolled up and fade to burgundy. It is a universal replacement fabric so it works with Lippert, Dometic and Carefee awnings. view full answer...
I would need to know the brand and model of your AC unit in order to find the correct replacement, but I've gone ahead and listed some common units below:
Penguin and Dometic Air Conditioners # AT3308046006
Dometic Brisk Air II # DMC46FR
Dometic Duo-Therm # DMC69FR
Coleman-Mach / RVP Brand # MA8335A5261
Advent Air Units # PXXMCOVER
Atwood Air Command # AT15050 view full answer...
The Replacement Slide # A77014 measures 10-3/4" Wide x 12-1/8" Tall and is designed for Elixir RV Screen Doors. I'm not sure what exactly you have on your 2014 Rockwood Signature Ultra Light but if this doesn't match up you can measure your slide and either filter through the linked selection or let me know what you have and I can see if we have something that is compatible. view full answer...
To replace the landing gear on your 2010 NorthRidge 320 RLQ you should be able to use the Landing Gear Set w/ Handle # RVLG-8HDL which has an 8,000 lbs weight rating and a 36-1/2" lift. While I don't know exactly what landing gear your RV currently has, you can verify fitment by simply measuring between your weld stops. If they measure 15-1/2" apart on the inside (17-1/2" on the outside) then this landing gear will definitely fit.
Your current motor should fit with this (if you have one)... view full answer...
Go To Results